Hallo zusammen,
ich bin mich gerade mit Proxmox am auseindersetzen und will eine VM mit einer Static IP konfigurieren.
Leider bekomme ich keine Verbinding nach außen oder eine Verbindung von außen auf die VM.
Weder über IPv4 noch über IPv6.
Ping von Proxmox (94.xx.xx.108) zur VM (94.xx.xx.79) funktioniert und auch andersrum. Firewall in Proxmox ist ausgeschaltet.
Proxmox Version ist 7.2-7
VM ist ein Debian 11.4 frisch aufgesetzt
Dafür habe ich auf dem Host System die Config "/etc/network/interfaces" geändert:
Auf dem Gast Betriebssystem habe ich "/etc/network/interfaces" wie folgt verändert:
Ich habe mich an diese Anleitung bei "Netzwerkkonfiguration Hostsystem Routed" und "Netzwerkkonfiguration Gastsystem Routed" gehalten.
Villeicht kann ja jemand helfen?
Danke
Gruß
Andreas
ich bin mich gerade mit Proxmox am auseindersetzen und will eine VM mit einer Static IP konfigurieren.
Leider bekomme ich keine Verbinding nach außen oder eine Verbindung von außen auf die VM.
Weder über IPv4 noch über IPv6.
Ping von Proxmox (94.xx.xx.108) zur VM (94.xx.xx.79) funktioniert und auch andersrum. Firewall in Proxmox ist ausgeschaltet.
Proxmox Version ist 7.2-7
VM ist ein Debian 11.4 frisch aufgesetzt
Dafür habe ich auf dem Host System die Config "/etc/network/interfaces" geändert:
Code:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface lo inet6 loopback
auto enp0s31f6
iface enp0s31f6 inet static
address 94.xx.xx.108
netmask 255.255.255.255
pointopoint 94.xx.xx.65
gateway 94.xx.xx.65
iface enp0s31f6 inet6 static
address 2a01:xxx:xxx:xxx::2
netmask 128
gateway fe80::1
up sysctl -p
auto vmbr0
iface vmbr0 inet static
address 94.xx.xx.108
netmask 255.255.255.255
bridge_ports none
bridge_stp off
bridge_fd 0
up ip route add 94.xx.xx.79/32 dev vmbr0
up ip route add 94.xx.xx.20/32 dev vmbr0
iface vmbr0 inet6 static
address 2a01:xxx:xxx:xxx::3
netmask 64
up ip -6 route add 2a01:xxx:xxx:xxx::/64 dev vmbr0
Auf dem Gast Betriebssystem habe ich "/etc/network/interfaces" wie folgt verändert:
Code:
source /etc/network/interfaces.d/*
auto lo
iface lo inet loopback
iface lo inet6 loopback
auto ens18
iface ens18 inet static
address 94.xx.xx.79
netmask 255.255.255.255
pointopoint 94.xx.xx.108
gateway 94.xx.xx.108
iface ens18 inet6 static
address 2a01:xxx:xxx:xxx::4
netmask 64
geteway 2a01:xxx:xxx:xxx::3
Ich habe mich an diese Anleitung bei "Netzwerkkonfiguration Hostsystem Routed" und "Netzwerkkonfiguration Gastsystem Routed" gehalten.
Villeicht kann ja jemand helfen?
Danke
Gruß
Andreas